Universidad de Jaén

Menú local

Syllabus 2023-24 - 14012001 - Calculation in Structures (Cálculo de estructuras)

Caption
  • Level 1: Tutorial support sessions, materials and exams in this language
  • Level 2: Tutorial support sessions, materials, exams and seminars in this language
  • Level 3: Tutorial support sessions, materials, exams, seminars and regular lectures in this language
DEGREE: Grado en Ingeniería civil (14012001)
FACULTY: SCHOOL OF ENGINEERING OF LINARES
DEGREE: Doble grado en Ingeniería de tecnologías mineras e Ingenieria civil (15012001)
FACULTY: SCHOOL OF ENGINEERING OF LINARES
ACADEMIC YEAR: 2023-24
COURSE: Calculation in Structures
SYLLABUS
1. COURSE BASIC INFORMATION
NAME: Calculation in Structures
CODE: 14012001 (*) ACADEMIC YEAR: 2023-24
LANGUAGE: English LEVEL: 1
ECTS CREDITS: 6.0 YEAR: 3 SEMESTER: SC
2. LECTURER BASIC INFORMATION
NAME: CAMACHO SAMPEDRO, JOSÉ
DEPARTMENT: U121 - INGENIERÍA MECÁNICA Y MINERA
FIELD OF STUDY: 605 - MECÁNICA DE MEDIOS CONTINUOS Y TEORÍA DE ESTRUCTUR
OFFICE NO.: D - 068 E-MAIL: jsampedr@ujaen.es P: 953648678
WEBSITE: -
ORCID: -
LANGUAGE: - LEVEL: 1
3. CONTENT DESCRIPTION

Unit 1. Introduction to Structural Analysis

Unit 2. Actions on structures

Unit 3. Analysis of Statically Indeterminate Structures

Unit 4. Influence Lines

Unit 5. Stiffness Methods of Structural Analysis

Unit 6. Introduction to Matrix Structural Analysis

Unit 7. Introduction to the Finite Element Method

Unit 8. Introduction to Structural Stability

Unit 9. Introduction to Plastic Analysis

Unit 10. Introduction to Structural Dynamics

 

PRACTICE

Practice 1. Trusses

Practice 2. Continuous Beams

Practice 3. Moment-Distribution Method

Practice 4. Matrix Method

Practice 5. Structural Stability

4. COURSE DESCRIPTION AND TEACHING METHODOLOGY

Not required.

Students with special educational needs should contact the Student Attention Service (Servicio de Atención y Ayudas al Estudiante) in order to receive the appropriate academic support

5. ASSESSMENT METHODOLOGY

S1. Attendance in practical sessions ( 5%)

  • Attendance will be controlled in the practical sessions.

S2. Theoretical and operational knowledge of the subject (90%)

  • Final written exam that will consist of two parts:
    Theoretical knowledge: objective multiple-choice test that will be weighted with 30% of the overall exam grade. It will be necessary to score more than 3 points out of 10 in theoretical knowledge, to add the points obtained in each of the parts of the theoretical exam.
    Operational knowledge: problem solving that will be weighted with 70% of the overall mark of the exam.
  • The following learning results are assessed: 6, 7 and 9.
  • The following skills are assessed: CC4, CC6, CCC1, CCC2, CCC4, CG1 and CG4.

S4. Practical cases and exercises (5%) 

  • Practices related to the content taught in the theoretical classes will be carried out. The student must submit a report for each of the practices and the average evaluation of these reports must be equal to or greater than 5 to consider them approved. To pass the subject it will be necessary to pass independently both the Exam and the Practices. In the case of not passing or not delivering the proposed practices, the student will not be able to pass the subject in the ordinary call and will have to pass a practical exam that will be held in the extraordinary call.
  • The following learning results are assessed: 6, 7 and 9.
  • The following skills are assessed: CC4, CC6, CCC1, CCC2, CCC4, CG1 and CG4.

6. BOOKLIST
MAIN BOOKLIST:
  • Structural Analysis, SI Edition. Edition: 6th Edition. Author: A. Kassimali. Publisher: Cengage Learning  (Library)
  • Structural Analysis. Edition: Tenth Edition in SI Units. Author: R.C. Hibbeler. Publisher: Pearson Education  (Library)
  • Advanced Methods of Structural Analysis. Edition: 2nd Edition. Author: I.A. Karnovsky, O.I. Lebed. Publisher: Springer Nature Switzerland  (Library)
  • Structural Dynamics. Theory and Computation. Edition: Sixth Edition. Author: M. Paz, Y.H. Kim. Publisher: Springer Nature Switzerland  (Library)
  • Structural Analysis with the Finite Element Method. Linear Statics [electronic resource] : Volume 1: Basis and Solids . Edition: 1st ed. 2009.. Author: Oñate, Eugenio. author.. Publisher: Springer Netherlands  (Library)
  • Structural Analysis with the Finite Element Method. Linear Statics [electronic resource] : Volume 2: Beams, Plates and Shells . Edition: 1st ed. 2013.. Author: Oñate, Eugenio. author.. Publisher: Springer Netherlands  (Library)
  • Análisis plástico de estructuras : introducción . Edition: -. Author: Dalmau García, María Rosa.. Publisher: Edicions UPC  (Library)
ADDITIONAL BOOKLIST:
  • Matrix structural analysis . Edition: 2nd. ed. Author: MacGuire, William. Publisher: John Wiley & Sons,  (Library)
  • The history of the theory of structures. Edition: 2nd Edition. Author: K.E. Kurrer. Publisher: Wilhelm Ernst & Sohn  (Library)
  • Razón y ser de los tipos estructurales . Edition: 11ª reimp. Author: Torroja Miret, Eduardo. Publisher: Instituto de Ciencias de la Construcción 'Eduardo Torroja'  (Library)
7. VIRTUAL / CLASSROOM TEACHING SCENARIO

TEACHING METHODOLOGY

Teaching activities

Format (on-site/online)*

Teaching methodology Description

A1 Lectures

On-site 50%

Lectures as scheduled at the classroom assigned to a part of the group and retransmission by video conferencing to the rest, with rotation student periodic, as determined by the Center.

There will be 2 weekly sessions of 2 and 1 hours respectively. In these sessions the teacher explains the concepts corresponding to the contents of the subject, and solves exercises related to the subject studied. Students will have supplementary material in Virtual Teaching.

A2 Lab Sessions

On-site 100%

Lectures as scheduled at the classroom assigned to a part of the group.

The practices will be in the laboratory of continuous media mechanics and structure theory or in computer classrooms. In these sessions, the numerical computation of the structure of an industrial building is derived.

A3 Tutor hours

Online

Tutoring will be provided online through synchronous GSuite Meet.

(*) The Center may establish a different percentage of attendance depending on the number of students and capacity of the classroom/laboratory

 

ASSESSMENT METHODOLOGY

Ordinary call

Assesment

Format (face-to-face / online synchronous or asynchronous)

Description

Percentage

Written test

On-site

Domain of theoretical content and practical

50%

Laboratory / computer practice report.

Face-to-face / Asynchronous online

Delivery of practice reports. Structure of the Report. Quality of Documentation and Presentation

25%

Practical activities

Asynchronous online

Resolution of practical cases and application exercises

25%

 Convocatoria extraordinaria

Assesment

Format (face-to-face / online synchronous or asynchronous)

Description

Percentage

Written test

On-site

Domain of theoretical content and practical

50%

Laboratory / computer practice report.

Face-to-face / Asynchronous online

Delivery of practice reports. Structure of the Report. Quality of Documentation and Presentation

25%

Practical activities

Asynchronous online

Resolution of practical cases and application exercises

25%

NOTE: To pass the subject it will be necessary to independently pass both the Exam and the Practices. On the other hand, in the theoretical exam it will be necessary to mark both theoretical and operational contents of the subject, having a grade greater than zero in each of these parts. The weight of theoretical content in the exam will be 30% compared to 70% of operational content (problems).

 

RESOURCES

The following shall be used as synchronous tools:

  • Tutorials by videoconference using Google Meet.

As asynchronous tools the following shall be used:

  • Presentations and solved exercises available in the virtual teaching platform.
  • Scripts of practices provided in the virtual teaching platform.
  • Consultation of doubts and tutor hours using the virtual teaching platform.

If the mixed or online scenario applies, the teaching staff reserve their right to not consent the recording, publication, transmission or reproduction of their speech, image, voice and other related teaching activities during the exercise of their duties at the University of Jaén.

8. VIRTUAL TEACHING SCENARIO

 TEACHING METHODOLOGY

Teaching activities

Format (on-site/online)*

Teaching methodology Description

A1 Lectures

Online

There will be 2 weekly sessions of 2 and 1 hours respectively. Classes will consist of synchronous online classes through GSuite Meet, with duration equal to the number of hours of classroom teaching of the subject. The videos may be recorded and provided through the platform of the subject. In these videos, the professor exposes and explains the concepts corresponding to the contents of the subject, and exercises related to the studied subject are solved.

A2 Lab Sessions

Online

Practice sessions will be held synchronously in GMeet, and may be recorded and uploaded in the virtual teaching platform. They will have two parts, an expository, where the teacher will explain the tasks to be carried out and a part of group work of the students on the laboratory equipment.

In these sessions, the numerical computation of the structure of an industrial building will be derived.

The scripts will be provided prior to completing the practice in Virtual Teaching.

A3 Tutor hours

Online

The tutorials will be carried out online in synchronous mode using GSuite Meet.

 

SISTEMA DE EVALUACIÓN

Convocatoria ordinaria

Assesment

Format (face-to-face / online synchronous or asynchronous)

Description

Percentage

Written test

Synchronous online

Domain of theoretical content and practical

50%

Laboratory / computer practice report.

Asynchronous online

Delivery of practice reports. Structure of the Report. Quality of Documentation and Presentation

25%

Practical activities

Asynchronous online

Resolution of practical cases and application exercises

25%

 Extraordinary call

Assesment

Format (face-to-face / online synchronous or asynchronous)

Description

Percentage

Written test

Synchronous online

Domain of theoretical content and practical

50%

Laboratory / computer practice report.

Asynchronous online

Delivery of practice reports. Structure of the Report. Quality of Documentation and Presentation

25%

Practical activities

Asynchronous online

Resolution of practical cases and application exercises

25%

NOTE: To pass the subject it will be necessary to independently pass both the Exam and the Practices. On the other hand, in the theoretical exam it will be necessary to mark both theoretical and operational contents of the subject, having a grade greater than zero in each of these parts. The weight of theoretical content in the exam will be 30% compared to 70% of operational content (problems).

 

RESOURCES

The following shall be used as synchronous tools:

  • Tutorials by videoconference using Google Meet.

As asynchronous tools the following shall be used:

  • Presentations and solved exercises available in the virtual teaching platform.
  • Scripts of practices provided in the virtual teaching platform.
  • Consultation of doubts and tutor hours using the virtual teaching platform.

If the mixed or online scenario applies, the teaching staff reserve their right to not consent the recording, publication, transmission or reproduction of their speech, image, voice and other related teaching activities during the exercise of their duties at the University of Jaén.

DATA PROTECTION CLAUSE (on line exams)

Institution in charge of data processing: Universidad de Jaén, Campus Las Lagunillas, s/n, 23071 Jaén

Data Protection Delegate: dpo@ujaen.es

Purpose: In accordance with the Universities Law and other national and regional regulations in force, carrying out exams and assessment tests corresponding to the courses students are registered in. In order to avoid frauds while sitting the exam, the exam will be answered using a videoconference system, being able the academic staff of the University of Jaén to compare and contrast the image of the person who is answering the exam with the student's photographic files. Likewise, in order to provide the exam with evidential content for revisions or claims, in accordance with current regulation frameworks, the exam will be recorded and stored.

Legitimacy: compliance with legal obligations (Universities Law) and other national and regional regulations currently in force.

Addressees: service providers who are the owners of the platforms where the exams are carried out and with whom the University of Jaén has signed the corresponding data access contracts.

Storage periods: those established in current in force regulations. In the specific case of exam videoconference recordings, not before the examination records and transcripts are closed or the exam can still be reviewed or challenged.

Rights: you can exercise your right of access, amendment, cancellation, opposition, suppression, limitation and portability by sending a letter to the postal or electronic address indicated above. In the event that you consider that your rights have been violated, you may submit a complaint to the Andalusian Council for Transparency and Data Protection www.ctpdandalucia.es

CLASS RECORDING CLAUSE PERSONAL DATA PROTECTION

Person in charge: Universidad de Jaén, Paraje Las Lagunillas, s/n; Tel.953 212121; www.ujaen.es

Data protection delegate (DPO): TELEFÓNICA, S.A.U. ; Email: dpo@ujaen.es

Procedure aim: To manage proper recordings of teaching sessions with the aim of facilitating learning process under a multimodal and/or online teaching

Period for record storage: Images will be kept during legal term according to regulations in force

Legitimacy: Data will be managed according to legal regulations (Organic Law 6/2001, December 21, on Universities) and given consent provided by selecting corresponding box in legal admission documents

Data recipients (transfers or assignments): Any person allowed to get access to every teaching modality

Rights: You may exercise your rights of access, rectification, cancellation, portability, limitation of processing, deletion or, where appropriate, opposition. To exercise these rights, you must submit a written request to the Information, Registration and Electronic Administration Service of the University of Jaen at the address above, or by e-mail to the address above. You must specify which of these rights you are requesting to be satisfied and, at the same time, you must attach a photocopy of your ID card or equivalent identification document. In case you act through a representative, legal or voluntary, you must also provide a document that proves this representation and identification. Likewise, if you consider that your right to personal data protection has been violated, you may file a complaint with the Andalusian Data Protection and Transparency Council www.ctpdandalucia.es