Universidad de Jaén

Menú local

Syllabus 2022-23 - 14513007 - Complementos de electrónica (Complementos de electrónica)

Caption
  • Level 1: Tutorial support sessions, materials and exams in this language
  • Level 2: Tutorial support sessions, materials, exams and seminars in this language
  • Level 3: Tutorial support sessions, materials, exams, seminars and regular lectures in this language
DEGREE: Grado en Ingeniería telemática (14513007)
FACULTY: SCHOOL OF ENGINEERING OF LINARES
DEGREE: Grado en Ingeniería de telecomunicación (14313008)
FACULTY: SCHOOL OF ENGINEERING OF LINARES
ACADEMIC YEAR: 2022-23
COURSE: Complementos de electrónica
SYLLABUS
1. COURSE BASIC INFORMATION
NAME: Complementos de electrónica
CODE: 14513007 (*) ACADEMIC YEAR: 2022-23
LANGUAGE: English LEVEL: 2
ECTS CREDITS: 6.0 YEAR: 4 SEMESTER: PC
2. LECTURER BASIC INFORMATION
NAME: FUENTES CONDE, MANUEL
DEPARTMENT: U133 - ING. ELECTRÓNICA Y AUTOMATICA
FIELD OF STUDY: 785 - TECNOLOGÍA ELECTRÓNICA
OFFICE NO.: D - 113 E-MAIL: mfuentes@ujaen.es P: 953648613
WEBSITE: http://www4.ujaen.es/~mfuentes/
ORCID: https://orcid.org/0000-0003-3131-8823
LANGUAGE: English LEVEL: 2
NAME: VIVAR GARCIA, MARTA
DEPARTMENT: U133 - ING. ELECTRÓNICA Y AUTOMATICA
FIELD OF STUDY: 785 - TECNOLOGÍA ELECTRÓNICA
OFFICE NO.: D - D-118 E-MAIL: mvivar@ujaen.es P: 953648638
WEBSITE: -
ORCID: -
LANGUAGE: English LEVEL: 2
3. CONTENT DESCRIPTION

THEORETICAL LESSONS:  

The theoretical block has been divided into three modules and seven topics, with the structure outlined below. In addition, the student will be provided with the ability to keep up to date with developments in science and technology, such as the dynamic environment of electronics.

Section 1 . Instrumentation and electronic measurements.

  Topic 1. Sensors and actuators.

  Topic 2. Instrumentation operational amplifier. Signal conditioning.

 

Section 2 . Data adquisition.

  Topic 3 . Fundamentals of data acquisition.

  Topic 4. Data acquisition on free hardware platforms.

 

  Section 3 . Power supplies systems

  Topic 5. Photovoltaic Energy. Cells, Modules, Stand-Alone Photovoltaic Systems.

  Topic 6. Switched sources.

  Topic 7. Supply of PV-based equipment

 

PRACTICAL LESSONS

The practical block of the subject includes practices in the laboratory and on the terrace of the center and its nature is compulsory. With global design, the development of communication skills, information, ideas, problems and solutions in the field of engineering and society in general is encouraged through processes of delivery of documentation or oral presentations.

Collaboration and teamwork will be encouraged through the design of practices in the organization of work.

 

Section 1: Electronic simulation and prototyping programs

Practice 1. Global Design. Pspice (guided-compulsory)

Practice 2. Advanced Pspice and PCB(guided-compulsory)

Practice 3. PCB prototyping (guided-compulsory)

Practice 4. Global design 

Section 2: Signal conditioning

Practice 5. Instrumentation amplifier, sensors and hardware platforms (guided-compulsory).

Practice 6. Data acquisition and storage (guided-compulsory).

Practice 7. Global design

Practice 8. Global design 

Section 3: Data acquisition and power supplies

Practice 9. Photovoltaic Systems (guided-compulsory).

Practice 10. Global design.

Practice 11. Photovoltaic Systems, Switched Power supplies (guided-compulsory).

Practice 12. Global design.

Practice 13. Presentation Global design (compulsory).

4. COURSE DESCRIPTION AND TEACHING METHODOLOGY

The master classes will include the PBL group creation, PBL proposal and typical problem solutions, besides the master lectures. They will be focused on promoting quality teaching, prioritizing activities that promote inclusive and equitable learning (SDG-4).

The practical lectures will help the students to understand theoretical lectures, with basic and design practices in order to demonstrate the capacities achieved by them. Work in a collaborative environment will be encouraged, as well as mixing with the communication of results, with special emphasis on the need for ongoing training in activities related to electronics throughout their professional life independently.

The practical part is going to have an important weight in the subject. The objective will be to set up the theoretical knowledge with the development of the practical classes.

At the beginning, while the theoretical knowledge is advanced, management of simulation and prototyping software programs will be acquired. Next, some basic electronic integration designs will be propose for the students to understand and improve them in the practical classes. The evaluation of the subject would be supported by an improved electronic integration based on the basic designs that have been offered. There are 6 ETCS, 2.7 corresponds to practical activities and 2.7 to theoretical classes.

Students with special educational needs should contact the Student Attention Service (Servicio de Atención y Ayudas al Estudiante) in order to receive the appropriate academic support

5. ASSESSMENT METHODOLOGY

The subject appreciates theoretical and practical knowledge. A practical design will be proposed to include almost the whole subject.

An useful, feasible, ethical and accurate assessment is made, whose objective it is not only the student`s qualification, but it should give enough data in order to analyze the development of the subject by the professor. A Problem Based Learning (PBL) is applied:

  •     A continuous, weekly evaluation. They need to develop the guided practices (7 sessions) and a global design (5 sessions). The weighting, in this case, would be 15 % corresponding to the participation (classes, practices, seminars and tutorials), 5 % to the attendance, 40 % to guided practices and 40 % to the global design.

A continuously monitoring is done and students are informed of their progress. The practices have an evaluation of 0-10 points. For the PBL option, the student will show a good knowledge in the 7 guided practices in order to justify the evolution of the global design in which they are working.

 

UNIQUE TEST

In compliance with article 13 of the Regulation of Academic Regime and Student Assessment of the University of Jaén, any student who justifiably (according to the assumptions contained in the aforementioned article) cannot participate in the regulated and complementary activities of a face-to-face nature proposed in the subject, may request the teaching staff to change the evaluation procedure to a Single Exam. This request, together with the corresponding justification, must be made at least one week before the beginning of the examination period. In this case, there will be a theoretical-practical exam that will evaluate S2 (concepts of the subject) and S4 (laboratory practices). 

A compulsory theoretic-practical exam or a design will be done in exceptional cases (non in person class).

6. BOOKLIST
MAIN BOOKLIST:
  • Arduino programming in 24 hours [electronic resource] Richard Blum.. Edition: -. Author: Blum, Richard, 1962-. Publisher: Sams  (Library)
  • Complete PCB design using OrCad capture and layout [electronic resource] by Kraig Mitzner.. Edition: -. Author: Mitzner, Kraig.. Publisher: Elsevier Newnes  (Library)
  • Sensors and signal conditioning [Recurso electronico] Ramon Pallas-Areny, John G. Webster. Edition: 2nd. Author: Pallás Areny, Ramón.. Publisher: Wiley-Interscience  (Library)
  • Digital electronics [electronic resource] : principles, devices and applications Anil K. Maini.. Edition: -. Author: Maini, Anil Kumar.. Publisher: J. Wiley  (Library)
  • Microelectronic circuits: analisys and desing Muhamman H. Rashid. Edition: 2nd ed.. Author: Rashid, Muhammad H.. Publisher: CENGAGE Learning  (Library)
  • Power electronics : devices, circuits, and applications Muhammad H. Rashid, Life Fellow IEEE, Electrical and Computer Engineering, University of West Florida. Edition: 4 th edition. Author: Rashid, Muhammad H.. Publisher: Pearson  (Library)
ADDITIONAL BOOKLIST:
  • Analog design and simulation using OrCAD Capture and PSpice Dennis Fitzpatrick. Edition: -. Author: Fitzpatrick, Dennis. Publisher: Elsevier  (Library)
  • Top-down network design Priscilla Oppenheimer. [electronic resource]. Edition: 2nd ed.. Author: Oppenheimer, Priscilla.. Publisher: Cisco Press  (Library)
8. VIRTUAL / CLASSROOM TEACHING SCENARIO

1.Teaching methodology and training activities.  

If the number of students is greater than the limited capacity in the laboratory (all teaching would be taught in a laboratory) the methodology and activities would be developed as follows: 

Training Activities

Format (classroom/online)*

Teaching methodology description

13 Practical sessions in laboratory

In person at 50%

Development of 13 practical sessions, lasting two hours each, in laboratorios applying rotation in small groups of 50%. Retransmission of practical clases to the rest of the group if the technical means allow it.

14 Theoretical sessions

In person at 50%

14 sessions of participatory master classes, of two hours each, held in the laboratory and broadcasting by videoconference to the rest of the group of the technical means allow it. Periodic rotation of students.

Tutorials

In person + Online

Some tutoring sessions will be done in person and others online (synchronous and asynchronous).

  

If the number of students is lower than the limited capacity in the laboratory (all teaching would be taught in a laboratory) the methodology and activities would be developed as follows: 

Training Activities

Format (classroom/online)*

Teaching methodology description

13 Practical sessions in laboratory

In person

Development of 13 practical sessions, lasting two hours each.

14 Theoretical sessions

In person

14 sessions of participatory master classes, of two hours each.

Tutorials

Presencial + Online

Some tutoring sessions will be done in person and others online (synchronous and asynchronous).

 2.  Evaluation system

Ordinary call

Assessment test

Format (in person/online synchronous or asynchronous)

Description

Percentage

Guided practices

In person

Assessment of guided practices.

40%

PBL Work presentation

In person

Presentation of the proposed Global design.

40%

Participation and attendance

In person

Attendance to classess and active participation.

20%

 

Extraordinary call

Assessment test

Format (in person/online synchronous or asynchronous)

Description

Percentage

Presentation of a theoretical-practical work

On line

Presentation of the implementation of a proposed global design, supported with videos of the work development asynchronously.

50%

 

Unique test*

Assessment test

Format (in person/online synchronous or asynchronous)

Description

Percentage

Completion of online examination on the officially established date

Synchronous

Taking an online exam to assess the theoretical knowledge of the subject and its application to problems solving.

50%

Presentation of a theoretical-practical work

In person in laboratory

Presentation of the implementation of a proposed global design, supported with videos of the work development asynchronously.

50%

* In compliance with article 13 of the Regulation of Academic Regime and Student Assessment of the University of Jaén, any student who justifiably (according to the assumptions contained in the aforementioned article) cannot participate in the regulated and complementary activities of a face-to-face nature proposed in the subject, may request the teaching staff to change the evaluation procedure to Single Test. This request, together with the corresponding justification, must be made at least one week before the beginning of the examination period. 

3.Means

In this scenario, the communication channels between teachers and students are fundamentally modified. The following resources will be used:

  •      Videoconference through Google Meet or similar.
  •      Virtual whiteboard using Google Jamboard or similar.
  •      Repository of contents and discussion fórums through the PLATEA teaching platfom or similar.

9. VIRTUAL TEACHING SCENARIO

1.Teaching methodology and training activities. 

Training Activities

Format (classroom/online)*

Teaching methodology description

13 Practical sessions in laboratory

Synchronous, Asynchronous

Replacement of the 13 practical sessions for online training activities. They will be carried out synchronously by videoconferencie and will be recorded for asynchronous consultation if the technical means allow it.

14 Theoretical sessions

Synchronous, Asynchronous

14 sessions of participatory master classes, of two hours each, broadcasting by videoconference to the rest of the group of the technical means allow it. It will be supported by audiovisual matrial for its asynchronous monitoring.

Tutorials

Online

All tutoring sessions will be done online (synchronous and asynchronous).

 

2.Evaluation system

Ordinary call

Assessment test

Format (in person/online synchronous or asynchronous)

Description

Percentage

Guided practices

Asynchronous

Assessment of guided practices.

40%

PBL Work presentation

Synchronous, Asynchronous

Presentation of the proposed Global design.

40%

Participation and attendance

Synchronous, Asynchronous

Attendance to classess and active participation.

20%

 

Extraordinary call

Assessment test

Format (in person/online synchronous or asynchronous)

Description

Percentage

Presentation of a theoretical-practical work

Synchronous, Asynchronous

Presentation of the implementation of a proposed global design through videoconference, supported with videos of the work development asynchronously.

50%

 

Unique test*

Assessment test

Format (in person/online synchronous or asynchronous)

Description

Percentage

Completion of online examination on the officially established date

Synchronous

Taking an online exam to assess the theoretical knowledge of the subject and its application to problems solving.

50%

Presentation of a theoretical-practical work

Synchronous, Asynchronous

Presentation of the implementation of a proposed global design through videoconference, supported with videos of the work development asynchronously.

50%

* In compliance with article 13 of the Regulation of Academic Regime and Student Assessment of the University of Jaén, any student who justifiably (according to the assumptions contained in the aforementioned article) cannot participate in the regulated and complementary activities of a face-to-face nature proposed in the subject, may request the teaching staff to change the evaluation procedure to a Single Test. This request, together with the corresponding justification, must be made at least one week before the beginning of the examination period.

 3. Means

In this scenario, the communication channels between teachers and students are fundamentally modified. The following resources will be used:

  •      Videoconference through Google Meet or similar.
  •      Virtual whiteboard using Google Jamboard or similar.
  •      Repository of contents and discussion fórums through the PLATEA teaching platfom or similar.

 

 

DATA PROTECTION CLAUSE (on line exams)

Institution in charge of data processing: Universidad de Jaén, Campus Las Lagunillas, s/n, 23071 Jaén

Data Protection Delegate: dpo@ujaen.es

Purpose: In accordance with the Universities Law and other national and regional regulations in force, carrying out exams and assessment tests corresponding to the courses students are registered in. In order to avoid frauds while sitting the exam, the exam will be answered using a videoconference system, being able the academic staff of the University of Jaén to compare and contrast the image of the person who is answering the exam with the student's photographic files. Likewise, in order to provide the exam with evidential content for revisions or claims, in accordance with current regulation frameworks, the exam will be recorded and stored.

Legitimacy: compliance with legal obligations (Universities Law) and other national and regional regulations currently in force.

Addressees: service providers who are the owners of the platforms where the exams are carried out and with whom the University of Jaén has signed the corresponding data access contracts.

Storage periods: those established in current in force regulations. In the specific case of exam videoconference recordings, not before the examination records and transcripts are closed or the exam can still be reviewed or challenged.

Rights: you can exercise your right of access, amendment, cancellation, opposition, suppression, limitation and portability by sending a letter to the postal or electronic address indicated above. In the event that you consider that your rights have been violated, you may submit a complaint to the Andalusian Council for Transparency and Data Protection www.ctpdandalucia.es

CLASS RECORDING CLAUSE PERSONAL DATA PROTECTION

Person in charge: Universidad de Jaén, Paraje Las Lagunillas, s/n; Tel.953 212121; www.ujaen.es

Data protection delegate (DPO): TELEFÓNICA, S.A.U. ; Email: dpo@ujaen.es

Procedure aim: To manage proper recordings of teaching sessions with the aim of facilitating learning process under a multimodal and/or online teaching

Period for record storage: Images will be kept during legal term according to regulations in force

Legitimacy: Data will be managed according to legal regulations (Organic Law 6/2001, December 21, on Universities) and given consent provided by selecting corresponding box in legal admission documents

Data recipients (transfers or assignments): Any person allowed to get access to every teaching modality

Rights: You may exercise your rights of access, rectification, cancellation, portability, limitation of processing, deletion or, where appropriate, opposition. To exercise these rights, you must submit a written request to the Information, Registration and Electronic Administration Service of the University of Jaen at the address above, or by e-mail to the address above. You must specify which of these rights you are requesting to be satisfied and, at the same time, you must attach a photocopy of your ID card or equivalent identification document. In case you act through a representative, legal or voluntary, you must also provide a document that proves this representation and identification. Likewise, if you consider that your right to personal data protection has been violated, you may file a complaint with the Andalusian Data Protection and Transparency Council www.ctpdandalucia.es