Universidad de Jaén

Topic 1.- Design in Mechanical Engineering

1.1.- Introduction to industrial design

1.2.- The design specifications

1.3.- The methodology in the design process

1.4.- Design engineering and manufacturing.Prototyping techniques

Topic 2.- Drawing in the field

2.1.- General principles for the representation of elements in the field

2.2.- Representation of drawing sheets in the field

Topic 3.- Generation of graphic documentation using 2D CAD techniques

Topic 4.- Three dimensional drawing: CAD and BIM environments

It will be used expository classes in large groups for the master classes. It will be generated a debate between the students and teacher in the topics of introduction to design. In small group classes; it will be carried out a set of practices in the laboratory of design related to the subject. These practices will aim, on the one hand, to represent both two-dimensional and three-dimensional creative industrial designs in CAD environments, as well as industrial buildings. Also, a series of exercises will be developed, both individual and group, on complementary aspects of the subject with the possibility of exposition by students of the work developed

Students with special educational needs should contact the Student Attention Service (Servicio de Atención y Ayudas al Estudiante) in order to receive the appropriate academic support

Aspect S1: Active participation in class, debates, group work, attendance. Skills to evaluate: CEM1, CEM11, CT2, CT4, CT6. Results to evaluate: 57,58,59,60,61,62,63,64,65,66.

Aspect S2: Mastery of the theoretical-practical operational concepts of the subject. skills to be evaluated: CEM1.CEM11,CT2.CT4.CT6. Results to evaluate: 57,58,59,60,61,62,63,64,65,66

Aspect S3: Structure and quality of the documentation.

Skills to be evaluated: CEM1.CEM11.CT2.CT4.CT6. Results to evaluate: 57,58,59,60,61,62,63,64,65,66

Aspect S4: Correct development of the programmed practices: structure, documentation, planning, standardization.

Skills to be evaluated: CEM1.CEM11..CT2.CT4.CT6. Results to evaluate: 57,58,59,60,61,62,63,64,65,66

In the ordinary call, a global evaluation will be carried out, including:

- The theoretical-practical evaluation (skills) by means of partial tests, the last of which will take place on the date indicated by the Center for the final test (which there will not be) of the Ordinary call. It will be necessary to pass a grade of 5 points in all these tests (with a weight of 60% of the final grade).

- The positive performance of individual and group exercises and scheduled practices on the CAD system. The works and/or practices will be carried out in accordance with the criteria established by the professors, and will have to be delivered within the deadlines established by them (results 57,58,59,60,61,62,63,64,65, 66). The weighting of the scheduled practices in the design laboratory and of the individual and group work commissioned will be 30% of the final grade.

- Class attendance and participation will be graded with 10% of the final grade.

In the extraordinary II and extraordinary I calls of the following course, the notes of personal work, attendance and participation obtained during the course and their weights in the final grade will be maintained, in accordance with the previous paragraphs. The theoretical-practical evaluation will be carried out through a single final test, on the date established by the Center for this purpose, which must be approved to pass the subject, not keeping the partial marks obtained during the course.

1)   TEACHING METHODOLOGY AND TRAINING ACTIVITIES:

(*) The Center may establish a different attendance percentage depending on the

number of students and classroom/laboratory capacity in accordance with sanitary measures.

(**) The Center may establish rotating attendance depending on the number of

students and classroom/laboratory capacity in accordance with sanitary measures (class in the

schedule and classroom/laboratory assigned to a part of the group and retransmission by

videoconference to the rest, with periodic rotation of students, as determined by the Center).

2)    EVALUATION SYSTEM:

The evaluation system will continue to be face-to-face. The percentages of the criteria of the face-to-face scenario are preserved:

In the ordinary call, a global evaluation will be carried out, including:

ORDINARY CALL

The theoretical-practical evaluation (skills) through a test in face-to-face format, on the date indicated by the Center for the final test of the Ordinary call. It will be necessary to pass a grade of 5 points in all these tests (with a weight of 60% of the final grade).

- The positive performance of individual and group exercises and scheduled practices on the CAD system, all in the same way as in the face-to-face scenario. The works and/or practices will be carried out in accordance with the criteria established by the professors, and will have to be delivered within the deadlines established by them (results 57,58,59,60,61,62,63,64,65, 66). The weighting of the scheduled practices in the design laboratory and of the individual and group work commissioned will be 30% of the final grade.

- Participation will be qualified with 10% of the final grade, all in face-to-face format.

  EXTRAORDINARY CALLS

In the extraordinary II and extraordinary I calls of the following course, in the same way as in face-to-face format, the notes of the personal work, attendance and participation obtained during the course and their weights in the final grade will be maintained, in accordance with the previous paragraphs. The theoretical-practical evaluation will be carried out through a single final test, on the date established by the Center for this purpose, which must be approved to pass the subject, not keeping the partial marks obtained during the course.

  In the Multimodal Scenario, the evaluation does not change with respect to the Face-to-Face Scenario. The final exam will be face-to-face and will be held on the officially established date.

A series of individual and/or group exercises and scheduled practices will be carried out during the course based on the rotation established by the center. The works and/or practices will be carried out in accordance with the criteria established by the professors, and will have to be delivered within the deadlines established by them.

3) RESOURCES:

PLATEA virtual teaching platform, Google Meet video conference, Google forms and other resources offered by the University itself.

The recording and/or dissemination by any means of synchronous or asynchronous face-to-face or non-face-to-face activities without the explicit permission of the teacher is expressly prohibited

1)TEACHING METHODOLOGY AND TRAINING ACTIVITIES:

2) EVALUATION SYSTEM:

Face-to-face exams are replaced by activities, tests and works proposed during the teaching period of the subject and the evaluation system becomes Continuous Evaluation. The student will deliver the set of tasks and works carried out electronically, through the PLATEA platform, always within the deadlines and requirements established by the teaching staff. In the Extraordinary call II, the face-to-face exams will be replaced in the same way by activities, tests and works proposed by the teaching staff of the subject. Likewise, the student will deliver the set of tasks and works carried out electronically, through the PLATEA platform, always within the deadlines and requirements established by the teaching staff.

In the ordinary call, a global evaluation will be carried out, including:

ORDINARY CALL

The theoretical-practical evaluation (skills) through partial tests in a synchronous online format, the last of which will take place on the date indicated by the Center for the final test (which there will not be) of the Ordinary call. It will be necessary to pass a grade of 5 points in all these tests (with a weight of 60% of the final grade).

The positive performance of individual and group exercises and scheduled practices on the CAD system, all in synchronous online format. The works and/or practices will be carried out in accordance with the criteria established by the professors, and will have to be delivered within the deadlines established by them (results 57,58,59,60,61,62,63,64,65, 66). The weighting of the programmed practices and of the individual and group works commissioned will be 30% of the final grade.

Participation will be graded with 10% of the final grade, being asynchronous online participation.

In the extraordinary call, a global evaluation will be carried out, including:

EXTRAORDINARY CALL

The theoretical-practical evaluation (skills) through a synchronous online test. It will be necessary to pass a score of 5 points in the test performed (with a weight of 60% of the final grade) and the positive performance of individual and/or group exercises and scheduled practices.

The works and/or practices and/or exercises will be carried out in accordance with the criteria established by the professors, and will have to be delivered within the deadlines established by them.

The weighting of the works and/or practices and/or exercises scheduled by the teachers following the criteria established by the teaching staff will be 30% of the final grade. Participation in the activities indicated by the teaching staff will be graded with 10% of the final grade and will follow the instructions of the teaching staff.

 3) RESOURCES:

PLATEA virtual teaching platform, Google Meet video conference, Google forms and other resources offered by the University itself.

  The recording and/or dissemination by any means of synchronous or asynchronous face-to-face or non-face-to-face activities without the explicit permission of the teacher is expressly prohibited.

Institution in charge of data processing: Universidad de Jaén, Campus Las Lagunillas, s/n, 23071 Jaén

Data Protection Delegate: dpo@ujaen.es

Purpose: In accordance with the Universities Law and other national and regional regulations in force, carrying out exams and assessment tests corresponding to the courses students are registered in. In order to avoid frauds while sitting the exam, the exam will be answered using a videoconference system, being able the academic staff of the University of Jaén to compare and contrast the image of the person who is answering the exam with the student's photographic files. Likewise, in order to provide the exam with evidential content for revisions or claims, in accordance with current regulation frameworks, the exam will be recorded and stored.

Legitimacy: compliance with legal obligations (Universities Law) and other national and regional regulations currently in force.

Addressees: service providers who are the owners of the platforms where the exams are carried out and with whom the University of Jaén has signed the corresponding data access contracts.

Storage periods: those established in current in force regulations. In the specific case of exam videoconference recordings, not before the examination records and transcripts are closed or the exam can still be reviewed or challenged.

Rights: you can exercise your right of access, amendment, cancellation, opposition, suppression, limitation and portability by sending a letter to the postal or electronic address indicated above. In the event that you consider that your rights have been violated, you may submit a complaint to the Andalusian Council for Transparency and Data Protection www.ctpdandalucia.es

Person in charge: Universidad de Jaén, Paraje Las Lagunillas, s/n; Tel.953 212121; www.ujaen.es

Data protection delegate (DPO): TELEFÓNICA, S.A.U. ; Email: dpo@ujaen.es

Procedure aim: To manage proper recordings of teaching sessions with the aim of facilitating learning process under a multimodal and/or online teaching

Period for record storage: Images will be kept during legal term according to regulations in force

Legitimacy: Data will be managed according to legal regulations (Organic Law 6/2001, December 21, on Universities) and given consent provided by selecting corresponding box in legal admission documents

Data recipients (transfers or assignments): Any person allowed to get access to every teaching modality

Rights: You may exercise your rights of access, rectification, cancellation, portability, limitation of processing, deletion or, where appropriate, opposition. To exercise these rights, you must submit a written request to the Information, Registration and Electronic Administration Service of the University of Jaen at the address above, or by e-mail to the address above. You must specify which of these rights you are requesting to be satisfied and, at the same time, you must attach a photocopy of your ID card or equivalent identification document. In case you act through a representative, legal or voluntary, you must also provide a document that proves this representation and identification. Likewise, if you consider that your right to personal data protection has been violated, you may file a complaint with the Andalusian Data Protection and Transparency Council www.ctpdandalucia.es