Universidad de Jaén

Menú local

Syllabus 2019-20 - 13512001 - Electrical Drives and Power Electronics (Accionamientos eléctricos y electrónica de potencia)

Caption
  • Level 1: Tutorial support sessions, materials and exams in this language
  • Level 2: Tutorial support sessions, materials, exams and seminars in this language
  • Level 3: Tutorial support sessions, materials, exams, seminars and regular lectures in this language
DEGREE: Grado en Ingeniería eléctrica (13512001)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Doble grado en Ingeniería eléctrica e Ingeniería electrónica industrial (13712001)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Doble grado en Ingeniería eléctrica e Ingeniería mecánica (13612001)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

ACADEMIC YEAR: 2019-20
SYLLABUS
1. COURSE BASIC INFORMATION
NAME: Electrical Drives and Power Electronics
CODE: 13512001 (*) ACADEMIC YEAR: 2019-20
LANGUAGE: English LEVEL: 1
ECTS CREDITS: 9.0 YEAR: 3 SEMESTER: SC
 
2. LECTURER BASIC INFORMATION
NAME: VERDEJO ESPINOSA, MARÍA ÁNGELES
DEPARTMENT: U120 - INGENIERÍA ELÉCTRICA
FIELD OF STUDY: 535 - INGENIERÍA ELÉCTRICA
OFFICE NO.: A3 - 234 E-MAIL: mverdejo@ujaen.es P: 953212462
WEBSITE: http://www10.ujaen.es/conocenos/departamentos/ingele/4692
LANGUAGE: - LEVEL: 1
 
3. CONTENT DESCRIPTION

PART 1: ELECTRONICS OF POWER

Topic 1: Fundamentals of Power Electronics
A. Applications of Power Electronics
B. Power devices and converters
C. Parameters of periodic signals
D. Resolution of electronic power circuits

Topic 2: Rectifiers
A. Non-controlled rectifiers
B. Controlled rectifiers
C. Non-autonomous investors
D. Cycleconverters
Topic 3: AC regulators

Topic 4: Switched DC regulators
A. Reducing regulator
B. Elevator regulator
C. Direct cutter
D. Reverse chipper

Topic 5: PWM Investors
A. Topologies of PWM inverters
B. PWM control by the input signal
C. PWM control with square signal
D. PWM control with sinusoidal signal
Practices and jobs
1. Diode
2. Thyristor
3. BJT
4. MOSFET
5. Linear DC regulators

PART 2: ELECTRICAL DRIVES

Topic 6. Relay And Protection Devices
1. Introduction. The Drives in Electrical Engineering
2. General information about electric drives (AAEE)
3. Applications of the AAEE
4. Performance of the AAEE and types of cargo.
5. The connection in the protection elements
6. Classification of the AAEE
7. Relays and Contactors
8. Engines
9. Other drives
10. Elements of command and protection. Fuses Others
11. Detectors
12. Regulating devices and actuators
13. Switching devices
14. Symbology
15. News of AAEE

Topic 7. General on Electric Drives
1. Introduction and applications
2. Objectives
3. Operation in four quadrants
4. Dynamics of the motor-load combination. Stability
5. Reduction of mechanical variables to the motor shaft
6. Equations. Typical systems
7. Types of service of the AAEE
8. Choice of the power assigned to the motor of an AE
9. Problem solving
10. Conclusions and bibliography

Topic 8: Starters
1. Overview of starters in AAEE systems
2. Definitions. Normative
3. Sectioning
4. Protection
5. Switching
6. Composition of a starter
7. Starter diagrams, typology.
8. Direct Start
9. Start Star-Triangle
10. Static Start by Resistances
11. Start by Autotransformer
12. Boot rotor motor start
13. Electronic Start
14. Other types of Start.
15. Electronic starters and speed variators
16. Frequency converter for asynchronous motor
17. Voltage regulator for asynchronous motor
18. Types of boot service
19. Conclusions and bibliography

Topic 9: Electric drives with asynchronous alternating current motors.
1. Introduction.
2. The Asynchronous Machine in permanent regime
3. The Asynchronous Machines in transitory regime
4. Types of speed regulation of asynchronous motors
5. Regulation of the speed by control of the line voltage applied to the stator
6. Regulation of the speed by control of voltage and line frequency. Scalar control.
7. Speed ​​regulation by means of a cycloconverter.
8. Speed ​​regulation by static control of additional resistance in the rotor.
9. Speed ​​regulation by recovery of sliding power.
10. Vector Control of Asynchronous Motors
11. Electric braking of three-phase asynchronous motors.
12. Troubleshooting
13. Conclusions and bibliography

Topic 10: Electric Drives with Alternating Current Motors - Synchronous.
1. Introduction.
2. Types of synchronous motors
3. The synchronous motor in permanent regime
4. The outgoing pole synchronous motor in transient mode
5. Models of permanent magnet synchronous motors.
6. Introduction to the AAEE with synchronous motors
7. Speed ​​regulation of synchronous motors in open loop.
8. Speed ​​regulation of synchronous motors in closed loop. Synchronous Motor Autopiloted.
9. Vector control of a permanent magnet synchronous motor.
10. Troubleshooting
11. Conclusions and bibliography

Topic 11: Electric Drives with Direct Current Motors.

1. Introduction
2. Structure and model of direct current machine
3. Operation of a DC machine in four quadrants
4. Regulation of the speed of DC motors by means of controlled rectifiers
5. Regulation of the speed of DC motors by means of Choppers
6. Regulation of the speed of DC motors through feedback.
7. Problem solving.
8. Conclusions and bibliography.

Topic 12: Selecting a more appropriate drive
1. Introduction
2. Installation and configuration of a power drive system
3. Dimensioning of a drive system

Topic 13: Selection and maintenance of an electric machine
1. Introduction
2. Theory and regulatory framework
3. Requirements of the machinery directive
4. Functional Security
5. Conclusions and bibliography

Topic 14: Emergency feeding. Uninterrupted power systems
1. Introduction
2. Theoretical and normative framework
3. Guide for the selection of a UPS
4. Technologies and classification
5. Applications
6. Batteries
7. System architecture
8. Sizing of the installation
9. Protections
10. Performance
11. Energy management
12. Distortions
13. Communication and integration in the network
14. Technical characteristics
15. Conclusions and bibliography

PRACTICES
P1 Symbology, schemes. Simulator.
P2 March-Paro. Timing
P3. Lighting control. Sequential.
P4 Lift. Doors.
P5 Direct start.
P6 Investor.
P7.Start-Triangle Start.
P8 Start Resistances.
P9 Variator Speed.
P10 Start several engines

4. COURSE DESCRIPTION AND TEACHING METHODOLOGY

METHODOLOGY:

Theoretical presentations will be made in the classes and problems related to the exposed topics will be solved
Simulation practices of electric drives and power electronics will be carried out
Technical visits to industrial facilities will be made
Work will be done in groups of students and will be presented in class or by video tutorials

Students with special educational needs should contact the Student Attention Service (Servicio de Atención y Ayudas al Estudiante) in order to receive the appropriate academic support

5. ASSESSMENT METHODOLOGY

The Temary consists of two parts:

Part I: Power Electronics (Topics 1 to 5)

Part II: Electric Drives (Items 6 to 14)

Part I, is 33% of the Final Note of the subject

Part II, supposes 67% of the Final Note of the subject.

Both parts contain:

Performing Theoretical-Practical Exam, written, which represents 70% of the final grade.
Assistance and completion of laboratory-simulation practices, which represent 15% of the final grade.
Realization / exhibition of works, directed academic activities, that suppose 15% of the final qualification.
In the Examination Test with theoretical contents and problems, the CEL1, CT2 and CT4 competences and the learning outcomes 6 and 7 are evaluated.

The CEL1, CT2 and CT4 competences and the learning outcomes 6 and 7 are evaluated in the class assignments and delivery of internship reports.

In the attendance to practical classes, in person or virtual, the competences CEL1, CT2 and CT4 and learning outcomes 6 and 7 are evaluated.

6. BOOKLIST
MAIN BOOKLIST:
  • Power electronics and motor drives [Recurso electrónico] : advances and trends . Edition: -. Author: Bose, Bimal K.. Publisher: Oxford : Academic, 2006.  (Library)
ADDITIONAL BOOKLIST:
  • Modeling and high performance control of electric machines. Edition: -. Author: Chiasson, John. Publisher: New York: IEEE &#59; Hoboken (New Jersey): Wiley-Interscience, cop. 2005  (Library)
  • Power electronics and motor drives [Recurso electrónico] : advances and trends . Edition: -. Author: Bose, Bimal K.. Publisher: Oxford : Academic, 2006.  (Library)
  • Problemas de electrónica de potencia. Edition: -. Author: -. Publisher: Madrid [etc.] : Pearson Prentice Hall, D.L. 2012  (Library)