Universidad de Jaén

Menú local

Syllabus 2018-19 - 13412016 - Fluid Mechanics (Mecánica de fluidos)

Caption
  • Level 1: Tutorial support sessions, materials and exams in this language
  • Level 2: Tutorial support sessions, materials, exams and seminars in this language
  • Level 3: Tutorial support sessions, materials, exams, seminars and regular lectures in this language
DEGREE: Grado en Ingeniería mecánica (13412016)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Doble grado en Ingeniería mecánica e Ingeniería de organización industrial (13812022)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Doble grado en Ingeniería eléctrica e Ingeniería electrónica industrial (13712026)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Grado en Ingeniería eléctrica (13512018)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Grado en Ingeniería electrónica industrial (13112020)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Grado en Ingeniería de organización industrial (13012016)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Doble grado en Ingeniería eléctrica e Ingeniería mecánica (13612022)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

DEGREE: Doble Grado en Ingeniería mecánica e Ingeniería electrónica industrial (13912026)
FACULTY: SCHOOL OF ENGINEERING OF JAÉN

ACADEMIC YEAR: 2018-19
SYLLABUS
1. COURSE BASIC INFORMATION
NAME: Fluid Mechanics
CODE: 13412016 (*) ACADEMIC YEAR: 2018-19
LANGUAGE: English LEVEL: 3
ECTS CREDITS: 6.0 YEAR: 2 SEMESTER: SC
 
2. LECTURER BASIC INFORMATION
NAME: GUTIÉRREZ MONTES, CÁNDIDO
DEPARTMENT: U121 - INGENIERÍA MECÁNICA Y MINERA
FIELD OF STUDY: 600 - MECÁNICA DE FLUIDOS
OFFICE NO.: A3 - 022 E-MAIL: cgmontes@ujaen.es P: 953212903
WEBSITE: http://www.fluidsujaen.es/
LANGUAGE: English LEVEL: 3
 
NAME: BOLAÑOS JIMÉNEZ, Mª ROCIO
DEPARTMENT: U121 - INGENIERÍA MECÁNICA Y MINERA
FIELD OF STUDY: 600 - MECÁNICA DE FLUIDOS
OFFICE NO.: A3 - 009 E-MAIL: rbolanos@ujaen.es P: 953212436
WEBSITE: www.fluidsujaen.es
LANGUAGE: English LEVEL: 1
 
NAME: LORITE DIEZ, MANUEL
DEPARTMENT: U121 - INGENIERÍA MECÁNICA Y MINERA
FIELD OF STUDY: 600 - MECÁNICA DE FLUIDOS
OFFICE NO.: A3 - 067 E-MAIL: mldiez@ujaen.es P: 953213002
WEBSITE: www.fluidsujaen.es
LANGUAGE: English LEVEL: 3
 
NAME: RUIZ RUS, JAVIER
DEPARTMENT: U121 - INGENIERÍA MECÁNICA Y MINERA
FIELD OF STUDY: 600 - MECÁNICA DE FLUIDOS
OFFICE NO.: A3 - 067 E-MAIL: jrrus@ujaen.es P: 953213002
WEBSITE: www.fluidsujaen.es
LANGUAGE: English LEVEL: 3
 
3. CONTENT DESCRIPTION

Lecturer in charge: Cándido Gutiérrez Montes

 

  1. Introduction to the Study of Fluid Mechanics. Introduction to the course -. Solid vs fluid (gas and liquid). What Is A Fluid? Fluid properties -. objectives and essential simplifications.-Basic Concepts. - Strategy in the study of fluids.
  2. Fluidostatics. Fundamental equation of hydrostatics. Implications. Forces on surfaces. Archimedes principle. Examples.
  3. Fluid kinematics. Fluid Field. Stationary and uniform flow. Path line, stream line, streak line.
  4. Conservation Laws. Introduction -. Conservation Laws -. Reynolds Transport Theorem. Continuity, momentum, energy equations. Applications.
  5. Dimensional analysis and physical similarity. Basis of Dimensional Analysis. Buckingham Theorem. Dimensionless parameters. Physical Interpretation. Similarity.
  6. Flow in ducts. Introduction -. Losses in Pipes: empirical equations - Darcy-Weissbach - Friction factor-. Dependence of friction factor with roughness and Reynolds number. Equations for the calculation of the friction factor -. laminar and turbulent solution. Colebrook equation - artificial and natural roughness - Methods of Calculation of friction factor in turbulent regime: iterations, approximate formulas and diagrams. The Moody diagram -. Local losses computation -. Interference.
  7. Introduction to flow in open channels. Introduction and basic concepts.-Dimensional Analysis of the problem.- Flow classification.- Uniform flow: Analysis and optimums section.-Non-uniform flow: Specific Energy, Critical Depth. Hydraulic jump.Open channels flow meters.

- Lab sessions: during the semester there will be different lab sessions regarding: fluidstatics, conservation laws, ideal flow, intro to CFD or flow in ducts.

4. COURSE DESCRIPTION AND TEACHING METHODOLOGY

The teaching methodology will consist of three different types of activities:

 

-       Lectures delivered at the classroom. In these classes the concepts previously commented will be introduced and explained by the lecturer. In addition, exercises related to the matter studied will be also solved. The methodology used will be that indicated previously.

-       Lab sessions: an overallnumber of five lab sessions of two hours each will be held, four of them at the fluid mechanics experimental lab and another one at the pc-lab. These will consist of a theoretical introduction, followed by the measurements acquisition by the students. The students will subsequently analyze the results and compare them with the theoretical concepts studied to write an individual final report of each session. The methodology used will be that indicated previously.

-       The collective mentoring sessions will consist of seminars related to the subject. There is a chance of these being delivered in Spanish. The methodology used will be that indicated previously.

Students with special educational needs should contact the Student Attention Service (Servicio de Atención y Ayudas al Estudiante) in order to receive the appropriate academic support

5. ASSESSMENT METHODOLOGY

The final mark is divided into four different items:

1.- Attendance to theoretical lectures and involvement during lectures.

2.- Final exam. This will consist of two different parts: first, a theoretical/questions part; second, to solve some related problems. A minimum mark is needed to pass the exam.

3 y 4.- Laboratory test and proposed tasks solution. These will represent a percentage of the final mark (see assessment), divided into the lab reports or test and the so called "actividad dirigida" (research project). The lab sessions (attendance and reports (the latter if required)) are compulsory to pass the subject.

By means of the above assessements, the competences CC2 and CT4 will be evaluated, as well as the corresponding results.

6. BOOKLIST
MAIN BOOKLIST:
  • Ingeniería fluidomecánica . Edition: -. Author: Marcos Vera Coello, Immacualda Iglesias Estradé, Antonio Sánchez Pérez y Carlos Martínez Bazán. Publisher: Madrid: Paraninfo, 2012  (Library)
  • Mecánica de fluidos. Edition: 5ª ed. Author: White, Frank M.. Publisher: Madrid [etc.]: McGraw-Hill Interamericana de España, D.L. 2007  (Library)
  • Fluid mechanics. Edition: -. Author: Spurk, Joseph H.. Publisher: Berlin [etc.]: Springer-Verlag, cop. 1997  (Library)
  • Fluid Dynamics. An Introduction. Edition: First Edition. Author: Rieutord, Michel. Publisher: Springer  (Library)
  • Introducción a la mécanica de fluidos. Edition: -. Author: Gordillo Arias de Saavedra, José Manuel. Publisher: Madrid : Paraninfo, 2017  (Library)
ADDITIONAL BOOKLIST:
  • Introducción a la dinámica de fluidos. Edition: -. Author: Batchelor, G.K.. Publisher: Madrid: Ministerio de Medio Ambiente. Centro de Publicaciones, 1997  (Library)
  • Fluid mechanics. Edition: 4th ed.. Author: Kundu, Pijush K.. Publisher: Amsterdam [etc.] : Elsevier Academic Press, cop. 2008.  (Library)
  • Fluid mechanics : problems and solutions. Edition: -. Author: Spurk, Joseph H.. Publisher: Berlin [etc.]: Springer, cop.1997  (Library)