Menú local
Guía docente 2020-21 - 74212005 - Circuitos de instrumentación electrónica
TITULACIÓN: | Máster Univ. en Ingeniería de telecomunicación |
CENTRO: | ESCUELA POLITÉCNICA SUPERIOR (LINARES) |
CURSO: | 2020-21 |
ASIGNATURA: | Circuitos de instrumentación electrónica |
NOMBRE: Circuitos de instrumentación electrónica | |||||
CÓDIGO: 74212005 | CURSO ACADÉMICO: 2020-21 | ||||
TIPO: Obligatoria | |||||
Créditos ECTS: 6.0 | CURSO: 1 | CUATRIMESTRE: PC | |||
WEB: http://dv.ujaen.es/docencia/ilias.php?ref_id=526854&cmd=render&cmdClass=ilrepositorygui&cmdNode=l8&baseClass=ilRepositoryGUI |
NOMBRE: MUÑOZ DÍEZ, JOSÉ VICENTE | ||
IMPARTE: Teoría - Prácticas [Profesor responsable] | ||
DEPARTAMENTO: U133 - ING. ELECTRÓNICA Y AUTOMATICA | ||
ÁREA: 785 - TECNOLOGÍA ELECTRÓNICA | ||
N. DESPACHO: D - 115 | E-MAIL: jmunoz@ujaen.es | TLF: 953 648635 |
TUTORÍAS: https://uvirtual.ujaen.es/pub/es/informacionacademica/tutorias/p/77714 | ||
URL WEB: jmunoz@ujaen.es | ||
ORCID: https://orcid.org/0000-0001-6190-7077 | ||
There are not pre ÂÂÂrequisites for this subject
The topics included in the subject Electronic Circuit for Instrumentation will complete -in two main lines- the knowledge of the students enrolled in the Master of Telecommunications of the University of Jaén. First, the subject will be a approach in order to get the knowledge and skills to design simple analog integrated circuits based on CMOS technology. In the second place the subject will put in practice the knowledge acquired to design electronic circuits able to get measurements of physical parameters by using sensors.
--
El alumnado que presente necesidades específicas de apoyo educativo, lo ha de notificar personalmente al Servicio de Atención y Ayudas al Estudiante para proceder a realizar, en su caso, la adaptación curricular correspondiente.código | Denominación de la competencia |
CB6 | Poseer y comprender conocimientos que aporten una base u oportunidad de ser originales en el desarrollo y/o aplicación de ideas, a menudo en un contexto de investigación |
CB7 | Que los estuduiantes sepan aplicar los conocimientos adquiridos y su capacidad de resolución de problemas en entornos nuevos o poco conocidos dentro de contextos más amplios (o multidisciplinares) relacionados con su área de estudio |
CE10 | Capacidad para diseñar y fabricar circuitos integrados. |
CE11 | Conocimiento de los lenguajes de descripción hardware para circuitos de alta complejidad. |
CE12 | Capacidad para utilizar dispositivos lógicos programables, así como para diseñar sistemas electrónicos avanzados, tanto analógicos como digitales. Capacidad para diseñar componentes de comunicaciones como por ejemplo encaminadores, conmutadores, concentradores, emisores y receptores en diferentes bandas. |
CE13 | Capacidad para aplicar conocimientos avanzados de fotónica y optoelectrónica, así como electrónica de alta frecuencia. |
CE14 | Capacidad para desarrollar instrumentación electrónica, así como transductores, actuadores y sensores. |
CG1 | Respetar a los derechos fundamentales y de igualdad entre hombres y mujeres, debiendo incluirse, en los planes de estudios en que proceda, enseñanzas relacionadas con dichos derechos |
CG2 | Respetar y promocionar de los Derechos Humanos y los principios de accesibilidad universal y diseño para todos de conformidad con lo dispuesto en la disposición final décima de la Ley 51/2003, de 2 de diciembre, de Igualdad de oportunidades, no discriminación y accesibilidad universal de las personas con discapacidad, debiendo incluirse, en los planes de estudios en que proceda, enseñanzas relacionadas con dichos derechos y principios. |
CG3 | Conocer los valores propios de una cultura de paz y de valores democráticos, y debiendo incluirse, en los planes de estudios en que proceda, enseñanzas relacionadas con dichos valores. |
CG4 | Haber adquirido conocimientos avanzados y demostrado, en un contexto de investigación científica y tecnológica o altamente especializado, una comprensión detallada y fundamentada de los aspectos teóricos y prácticos y de la metodología de trabajo en uno o más campos de estudio. |
CG5 | Saber aplicar e integrar sus conocimientos, la comprensión de estos, su fundamentación científica y sus capacidades de resolución de problemas en entornos nuevos y definidos de forma imprecisa, incluyendo contextos de carácter multidisciplinar tanto investigadores como profesionales altamente especializados; |
CT1 | Capacidad de análisis de problemas, síntesis de soluciones y comunicación oral y escrita de los resultados a distintos públicos. |
CT2 | Capacidad de organización, planificación y de gestión de la información. |
CT5 | Capacidad de buscar y encontrar información de distintas fuentes y para entender el lenguaje y propuestas de otros especialistas |
CT6 | Ser capaz de integrar conocimientos y enfrentarse a la complejidad de formular juicios a partir de una información que,siendo limitada, incluya reflexiones sobre las responsabilidades sociales y éticas vinculadas a la aplicación de sus conocimientos y juicios. |
Resultados de aprendizaje | |
Resultado Resul-16 | Aprender a diseñar circuitos analógicos integrados para aplicaciones de adquisición de datos. |
Resultado Resul-17 | Conocer los principios de funcionamiento de los principals sesores y saber usarlos en aplicaciones prácticas. |
Resultado Resul-18 | Capacidad para manejar herramientas de software de diseño de circuitos integrados y adquisición de señales. |
Resultado Resul-19 | Habilidad para resolver problemas relacionados con la materia. |
Resultado Resul-20 | Diseñar sistemas de medida con sensores. |
PART I: FUNDAMENTALS OF ANALOG INTEGRATED CIRCUITS
Chapter 1. Introduction
Chapter 2. Amplification stages
Chapter 3. Differential amplifier
Chapter 4. Operational amplifiers
PART II: SENSORS AND MEASURE SYSTEMS
Chapter 5. Temperature measuring
Chapter 6. Resistive sensors
Chapter 7. Capacitive sensors
Chapter 8. Magnetic sensors
Chapter 1. Introduction
Definitions. Technical evolution of IC. Integration
Scales. Manufacturing processes of IC. Signals and variables.
Measuring systems. Static/dynamic characteristics. CAD
Tools.
Chapter 2. Amplification stages
Introduction. Review of BJTs and MOSFETs. Amplification
stages based on MOSFET transistors: common source, common gate
and common drain. Current sources: current mirrors, cascode
source and current multipliers
Practical session 1: Comparison between two CMOS amplification stages
Chapter 3. Differential amplifier
Introduction. The MOSFET differential amplifier. DC and AC
response. Differential mode gain. Common mode gain. Common-mode
rejection ratio (CMRR). Input and output resistance in common
mode. Input and output resistance in differential
mode.
Practical session 2:
Characterisation of an active-loaded differential amplifier
Chapter 4. Operational amplifiers.
Introduction. Parts of a simple operational amplifier:
differential stage, amplification stage, DC power supply stage
and output stage. Study of the OTA Miller amplifier. Real
response of a operational amplifier. Instrumentation amplifiers.
Practical session 3: Open loop
characterisation of the OTA-Miller amplifier
Chapter 5. Introduction to instrumentation systems.
Overall schematic of an
intrumentation system. Sensors and trannsducers. Signal
conditioning. Analog to digital converters. Static and dynamic
features of instrumentation systems. Acquisition, analysis, and
data storage using LabView. Errors and uncertainty analysis.
Practical session 4: Introduction to Labview
Chapter 6. Temperature measurements
Introduction. Thermistors, thermocouples and RTDs. Signal conditioning for temperature sensors. Integrated temperature sensors.
Practical session 5: Temperature
measurement
Chapter 7. Magnetic sensors
Introduction. Fundamentals of
Hall Effect. Hall linear sensors. Commercial hall sensors.
Practical session 6: Current
measurement by hall effect sensor.
Chapter 8. Resistive sensors
Introduction. P otentiometer transducer. Strain gauges. Light dependent resistors. Applications
Chapter 9. Electronic power drivers
Introduction.
Electronic devices used for
designing electronic power drivers. Non-Insulated power drivers.
Insulated power drivers. Thermal management
Practical session 7: Labview application: measuring, control and data analysis
ACTIVIDADES | HORAS PRESENCIALES | HORAS TRABAJO AUTÓNOMO | TOTAL HORAS | CRÉDITOS ECTS | COMPETENCIAS (códigos) |
---|---|---|---|---|---|
A1 - Clases expositivas en gran grupo
|
29.1 | 43.65 | 72.75 | 2.91 |
|
A2 - Clases en grupos de prácticas
|
29.1 | 43.65 | 72.75 | 2.91 |
|
A3 - Tutorias Colectivas
|
1.8 | 2.7 | 4.5 | 0.18 |
|
TOTALES: | 60.0 | 90.0 | 150.0 | 6.0 |
The methodology followed in this subject are based on four main
points:
1) Lessons and seminars. It means master lectures delivered
by the professor where the active participation of the students is
going to be boosted.
2) Practical lessons. These lessons will be delivered in the
laboratory in groups where the maximum number of student per group
will not be more that 20 people. These lessons will allow to put in
practice the concepts which will be describe through the
theoretical lessons.
3) Presentations by the students in class. The students will
expose their works about some topics which it will be proposed by
the professor.
4) Tutorial sessions in group or individual. This activity
will allow to give a more personal answer to the doubts that the
students will have along the academic year.
ASPECTO | CRITERIOS | INSTRUMENTO | PESO |
---|---|---|---|
Asistencia y/o participación en actividades presenciales y/o virtuales | -Active participation in lectures and tutorials. - Active participation in lab work. -Attendance to individual tutorial and activities. | Observation and problems resolution | 10.0% |
Conceptos teóricos de la materia | Practical and theoretical assimilation of subject concepts. | Written exam | 50.0% |
Prácticas de laboratorio/campo/uso de herramientas TIC | Design and implementation of electronic circuits | -Documentation delivered. The revision for each document includes: -Structure - Quality - Novelty - Clarity of presentation | 40.0% |
The evaluation of the subject is based on four points:
1) Attendance and active participation in lectures. This
point will represent 5% of the final mark.
2) Problems resolution and/or presentations in class. This
point will represent 25% of the final mark. The problems will
have to be solved and given for its correction by the professor.
The presentations will consist in a hour of speech of a proposed
topic by the professor.
3) Design and implementation of electronic circuits in
practical sessions. This point will represent the 35% of the final
mark. There will be practical sessions which are going to be
corrected in the laboratory and other ones which will be necessary
to prepare a final report.
4) Written exam. This point will represent 35% of the
final mark.
Relevant information for extra session exam (July)
The mark for S4 (pracitical sessions) in the extra exam session will be assessed by a practical exam, if any . Nevertheless, a mark up to 4 in S2 (written exam) will be necessary to proceed to the computation of the overall mark (computing as the average of the available ones ). The weigths will be also modified due to the fact that S1 mark is not applicable in the extra exam session, so only S2 (60%) and S4 (40%) will be computed. The student will pass the course in case they get a overall mark in exceed of 5.
The first point described above is aimed to evaluate the progress of the students in order to achieve the competences CB6, CG1, CG2, CG3, CT1 and CT5. Moreover, the following results of the learning are also evaluated by this activity: Resul-16 and Result-17.
The second point described above is aimed to evaluate the progress of the students in order to achieve the competences CB6, CE12, CG5 and CT1. Moreover, the following results of the learning are also evaluated by this activity: Resul-16, Resul-17, Resul-18 and Result-19.
The third point described above is aimed to evaluate the progress of the students in order to achieve the competences CB6, CE10, CE11, CE12, CE13, CE14, CG4, CG5 and CT2. Moreover, the following results of the learning are also evaluated by this activity: Resul-16, Resul-17, Resul-19 and Result-20.
The fourth point described above is aimed to evaluate the progress of the students in order to achieve the competences CB7, CE10, CE12, CG4, CG5 and CT1. Moreover, the following results of the learning are also evaluated by this activity: Resul-18, Resul-19 and Resul-20.
-
Microelectronics circuits. Edición: 5th ed. Autor: Sedra, Adel S.. Editorial: New York ; Oxford: Oxford University Press, 2004.
- Observaciones: Suitable for theoretical lessons and problems resolution
-
Circuitos microelectrónicos: análisis y diseño. Edición: -. Autor: Rashid, Muhammad H.. Editorial: Madrid [etc.]: International Thomson, cop. 2002.
- Observaciones: Suitable for theoretical lessons and problems resolutions
-
Diseño electrónico: circuitos y sistemas. Edición: 2ª ed. Autor: Savant, C. J. , jr.. Editorial: Argentina [etc.]: Addison-Wesley Iberoamericana, cop. 1992.
- Observaciones: Suitable for theoretical lessons
-
Instrumentación electrónica. Edición: 3ª ed.. Autor: -. Editorial: Madrid : Thomson, 2011.
- Observaciones: Suitable for theoretical lessons
-
Problemas resueltos de instrumentación y medias electrónicas . Edición: -. Autor: -. Editorial: Madrid: Paraninfo, 1994.
- Observaciones: Solved instrumentation problems
-
Principios de electrónica. Edición: 7ª ed.. Autor: Malvino, Albert Paul. Editorial: Madrid [etc.]: McGraw-Hill, D.L. 2010.
- Observaciones: Suitable for theoretical Lessons
-
Analysis and design of analog integrated circuits. Edición: 4th ed.. Autor: -. Editorial: New York [etc.] : John Wiley and Sons, cop. 2001.
- Observaciones: Suitable for theoretical Lessons
-
Sensores y acondicionadores de señal : problemas resueltos. Edición: -. Autor: Pallás Areny, Ramón. Editorial: Barcelona : Marcombo, 2008.
- Observaciones: Suitable for theoretical Lessons
Theoretical lectures:
Chapter 1. Introduction
(2 hours)
Chapter 2. Amplification stages (8 hours)
Chapter 3. Differential
amplifier
(8 hours)
Chapter 4. Operational
amplifiers
(12 hours)
Chapter 5. Introduction
to instrumentation systems.
(6 hours)
Chapter
6. Temperature measurements
(4 hours)
Chapter 7. Magnetic
sensors
(4 hours)
Chapter 8. Resistive
sensors
(4 hours)
Chapter 9. Electronic power drivers (4 hours)
Practical sessons:
1º practical sesson
(2
hours)
2º practical sesson (2 hours)
3º practical sesson
(2 hours)
4º practical sesson (2 hours)
5º practical sesson
(2 hours)
6º practical sesson (2 hours)
7º practical sesson
(2 hours)
Due to the short number of students usually enrolled in the master the lessons for all the students will take place in the indicated classroom. So, any access restriction restriction will be applied.
Teaching Activities
and Methodologies
Teaching
activities
|
Format |
Methodologies |
Theoretical lectures for all the students which will last 1 hour |
Online and synchronous |
Online Masterclass
|
Practical sessions for
all the students in laboratory which will last 2 hours
|
Online and synchronous |
Online practical sessions which will include seminars and simulations tools for electronic circuits |
Tutorial lectures |
Online |
By any available online platform |
Assessment
OVERALL ASSESSMENT |
|||
Kind of test |
Tool |
Description |
Weigth |
S1. Active participation in lectures and tutorials. - Active participation in lab work. -Attendance to individual tutorial and activities. |
Observation and problems resolution |
-Active participation in lectures and tutorials. - Active participation in lab oratory work. -Attendance to individual tutorial and activities. |
10 % |
S2. Practical and theoretical assimilation of subject concepts. |
Practical and theoretical assimilation of subject concepts. |
Online written exam according to the official schedule |
50 % |
S4. Design and implementation of electronic circuits |
Designing and simulation of the proposed practical examples |
-Documentation delivered. The revision for each document includes: -Structure - Quality - Novelty - Clarity of presentation |
4 0 % |
The mark for S4 in the extra exam session will be assessed by a practical exam if any . Nevertheless, a mark up to 4 in S2 will be necessary to proceed to the computation of the overall mark (computing as the average of the available ones ). The weigths will be modified due to the fact that S1 mark is not applicable in the extra exam session, so only S2 (60%) and S4 (40%) will be computed. The student will pass the course in case they get a overall mark in exceed of 5. |
Single Exam* |
|||
Test |
Tool |
Description |
Weight |
S2. Practical and theoretical assimilation of subject concepts. |
Practical and theoretical assimilation of subject concepts. |
Online written exam |
50% |
S4. Design and implementation of electronic circuits |
Designing and simulation of the proposed practical examples |
-Documentation delivered. The revision for each document includes: -Structure - Quality - Novelty - Clarity of presentation |
50% |
At the very least a mark of 4.5 in S2 and S4 will be needed to compute the overall mark. The student will pass the course in case they get a overall mark in exceed of 5. |
* According to the article 13 th of the Official Academic Guideline for the assessment of the Students at the University of Jaen whoever student has the right to ask for this exam as long as they justify the reason why the can not take part in regular teaching activities. They must let the professor know about it a week in advance the beginning of the exam period.
Resources
The communication means will be profoundly modified under this scenario. Thus, the following resources will be used:
Video call on Google Meet o whatever similar platform .
Virtual blackboard by Google Jamboard o r similar.
Resources available on ILIAS platform .
Responsable del tratamiento: Universidad de Jaén, Campus Las Lagunillas, s/n, 23071 Jaén
Delegado de Protección de Datos:dpo@ujaen.es
Finalidad: Conforme a la Ley de Universidades y demás legislación estatal y autonómica vigente, realizar los exámenes correspondientes a las asignaturas en las que el alumno o alumna se encuentre matriculado. Con el fin de evitar fraudes en la realización del mismo, el examen se realizará en la modalidad de video llamada, pudiendo el personal de la Universidad de Jaén contrastar la imagen de la persona que está realizando la prueba de evaluación con los archivos fotográficos del alumno en el momento de la matrícula. Igualmente, con la finalidad de dotar a la prueba de evaluación de contenido probatorio de cara a revisiones o impugnaciones de la misma, de acuerdo con la normativa vigente, la prueba de evaluación será grabada.
Legitimación: cumplimiento de obligaciones legales (Ley de Universidades) y demás normativa estatal y autonómica vigente.
Destinatarios: prestadores de servicios titulares de las plataformas en las que se realicen las pruebas con los que la Universidad de Jaén tiene suscritos los correspondientes contratos de acceso a datos.
Plazos de conservación: los establecidos en la normativa aplicable. En el supuesto en concreto de las grabaciones de los exámenes, mientras no estén cerradas las actas definitivas y la prueba de evaluación pueda ser revisada o impugnada.
Derechos: puede ejercitar sus derechos de acceso, rectificación, cancelación, oposición, supresión, limitación y portabilidad remitiendo un escrito a la dirección postal o electrónica indicada anteriormente. En el supuesto que considere que sus derechos han sido vulnerados, puede presentar una reclamación ante el Consejo de Transparencia y Protección de Datos de Andalucía www.ctpdandalucia.es
Responsable del tratamiento: Universidad de Jaén, Paraje Las Lagunillas, s/n; Tel.953 212121; www.ujaen.es
Delegado de Protección de Datos (DPO): TELEFÓNICA, S.A.U. ; Email: dpo@ujaen.es
Finalidad del tratamiento: Gestionar la adecuada grabación de las sesiones docentes con el objetivo de hacer posible la enseñanza en un escenario de docencia multimodal y/o no presencial.
Plazo de conservación: Las imágenes serán conservadas durante los plazos legalmente previstos en la normativa vigente.
Legitimación: Los datos son tratados en base al cumplimiento de obligaciones legales (Ley Orgánica 6/2001, de 21 de diciembre, de Universidades) y el consentimiento otorgado mediante la marcación de la casilla habilitada a tal efecto.
Destinatarios de los datos (cesiones o transferencias): Toda aquella persona que vaya a acceder a las diferentes modalidades de enseñanza.
Derechos: Ud. podrá ejercitar los derechos de Acceso, Rectificación, Cancelación, Portabilidad, Limitación del tratamiento, Supresión o, en su caso, Oposición. Para ejercitar los derechos deberá presentar un escrito en la dirección arriba señalada dirigido al Servicio de Información, Registro y Administración Electrónica de la Universidad de Jaén, o bien, mediante correo electrónico a la dirección de correo electrónico. Deberá especificar cuál de estos derechos solicita sea satisfecho y, a su vez, deberá acompañarse de la fotocopia del DNI o documento identificativo equivalente. En caso de que actuara mediante representante, legal o voluntario, deberá aportar también documento que acredite la representación y documento identificativo del mismo. Asimismo, en caso de considerar vulnerado su derecho a la protección de datos personales, podrá interponer una reclamación ante el Consejo de Transparencia y Protección de Datos de Andalucía www.ctpdandalucia.es